The Futaba R6208SB S-Bus Receiver has an S.BUS system output port and a conventional system channel output. It can also be used with conventional system servos, etc. in addition to S.BUS system compaitible servos and gyros, etc.
New: S.BUS output Up to 18 of the new, programmable S-BUS servos or other S.Bus components such as battery switch PSS2018, HC-3 Xtreme, gyro GY520, etc.
can be connected in series to this output. Digital addressing means the servo reacts only to information containing the correct servo address.
~ Compatible with 2.4 GHz FASST RF modules TM-8, TM-10, TM-14 and FASST transmitters as from 8 channel + Multi mode.
~ Specifications: S.Bus compatible/FASST-2.4GHz (Multi Ch) system / 8 channels / high-speed receiver Dual antenna diversity
~ Power requirement: 3.7V to 7.4V (Voltage range: 3.5 to 8.4V)
~ Size: 0.98 x 1.86 x 0.56 in. (24.9 x 47.3 x 14.3 mm)
~ Weight: 0.49 oz. (13.8g)
What is S.Bus? Different from conventional radio control systems the Futaba S.Bus System uses data communication to transmit control signals from a receiver to a servo, gyro, or other S.Bus compatible device.
This data includes commands such as "move the channel 3 servo to 15 degrees, move the channel 5 servo to 30 degrees" to multiple devices.
The S.Bus devices execute only those commands for their own set channel. For this reason, it can be used by connecting multiple servos to the same signal line.
*** NO WARRANTY / NO REFUND / NO RETURN / NO EXCHANGE ***